Swing Gates «Energy 3D»
The height of the gate is from 1.0 to 2.0 m, width up to 6 m.
Gates are equipped with eyelet to install hinge lock. The shutter of a gate is the frame from the profile 60x40x2.0, on which with the help of clamps the panel with V-shaped curves with the cell 50x200 mm is fastened. The non-adjustable hinges with opening angle no less than 90°, inwards or outwards. The gate posts are made of profile 100x100x3.0. Ends are welded. All metal parts are galvanized and painted with polymer paint.
Gate posts are concreted into the hole to a depth of 1 m. The gap from the plane of concrete up to the lower edge of the gate is 70±10 mm.
Gates are equipped with eyelet to install hinge lock. The shutter of a gate is the frame from the profile 60x40x2.0, on which with the help of clamps the panel with V-shaped curves with the cell 50x200 mm is fastened. The non-adjustable hinges with opening angle no less than 90°, inwards or outwards. The gate posts are made of profile 100x100x3.0. Ends are welded. All metal parts are galvanized and painted with polymer paint.
Gate posts are concreted into the hole to a depth of 1 m. The gap from the plane of concrete up to the lower edge of the gate is 70±10 mm.
