Swing gate «BASTION»
Height is 1.5÷2.5 m, width is 3÷6 m. The gate is locked with the help of bar between the shutter with hinge lock and bar in the ground (on each shutter) if you need.
The shutter of a gate is the frame from 60x40x1.5 or 80x60x2.0 profile. The flat grid panel is welded in it. The panel is made without bends, with the cell 50x100 mm, rod`s diameter is 5 mm. The non-adjustable hinges with opening angle no less than 90°, inwards or outwards (available through an angle of 180°). The gate posts are made of 100x100x3 profile. All metal parts are galvanized and painted with polymer paint.
Gate posts are concreted into the hole to a depth of 1 m.
The gap from the plane of concrete up to the lower edge of the gate is 70±10 mm.
The shutter of a gate is the frame from 60x40x1.5 or 80x60x2.0 profile. The flat grid panel is welded in it. The panel is made without bends, with the cell 50x100 mm, rod`s diameter is 5 mm. The non-adjustable hinges with opening angle no less than 90°, inwards or outwards (available through an angle of 180°). The gate posts are made of 100x100x3 profile. All metal parts are galvanized and painted with polymer paint.
Gate posts are concreted into the hole to a depth of 1 m.
The gap from the plane of concrete up to the lower edge of the gate is 70±10 mm.
