The wicket «BASTION»
Height is 1.5÷2.5 m, width is 1.0 and 1.2 m.
The wicket is equipped with a mechanical mortise lock and is available in universal versions. Side door opening left or right is determined at installation of wickets. The opening direction-inward or outward-is regulated by the installation of the lock and the latch z-shaped stop. The shutter of the wicket is a frame with the panel which is on the mounting screws.
The frame is made of 60x40x1.5 profile. The panel is made of mesh without bends (50x100 mm, rod`s diameter 5 mm). The non-adjustable hinges with opening angle no less than 90°, inwards or outwards. Wicket posts are made from 80x80x2.0 profile.
All metal parts are galvanized and painted with polymer paint.
Wicket posts are concreted into the hole to a depth from 0.5 m. Class of concrete strength is at least B15.
The gap from the plane of concrete up to the lower edge of the wicket is 100±10 mm.
The wicket is equipped with a mechanical mortise lock and is available in universal versions. Side door opening left or right is determined at installation of wickets. The opening direction-inward or outward-is regulated by the installation of the lock and the latch z-shaped stop. The shutter of the wicket is a frame with the panel which is on the mounting screws.
The frame is made of 60x40x1.5 profile. The panel is made of mesh without bends (50x100 mm, rod`s diameter 5 mm). The non-adjustable hinges with opening angle no less than 90°, inwards or outwards. Wicket posts are made from 80x80x2.0 profile.
All metal parts are galvanized and painted with polymer paint.
Wicket posts are concreted into the hole to a depth from 0.5 m. Class of concrete strength is at least B15.
The gap from the plane of concrete up to the lower edge of the wicket is 100±10 mm.